Our Services

Rebuild

Has your property been struck by a vehicle or collapsed due to other factors? Has it deteriorated to the point of no return?

Usually rebuilding is necessary when structural integrity has been compromised. If the masonry were a vehicle, it be considered “written-off”. Contributing factors may include:

  • Vehicle collision damage
  • Fallen tree damage
  • Sunken or lifted concrete foundations (usually due to earth movement or tree roots)
  • Poor workmanship

Whether it’s a single pier or half a double-story house; we’ve repaired it before & we can help. Our experienced team will rebuild to pre-existing specifications plus update to current National Construction Code 2019 standards. Contact us today to arrange a FREE assessment.

Repoint

Have the mortar-joints on your property disappeared? Do they disintegrate into pure sand texture with just a finger rub? Are there continuous cracks?

Contributing factors to deterioration usually include:

  • Exposure to constant external moisture
  • Poor workmanship (mortar mix defects)
  • Age
  • Earth movement (minor)

Repointing is a four-stage process that replaces old – sometimes defective – mortar with new; & it doesn’t require rebuilding! Repointing reseals your masonry from the Australian weather, rejuvenates the aesthetic appeal, can in some cases improve structural integrity.

  • Stage 1: We remove the old-mortar (usually 15-20mm depth; in severe cases more) using safe equipment.
  • Stage 2: Using our specialised experience, we are able to colour-match your new mortar with the old (existing). Then we utilise powered injection guns to ensure consistent full depth recovery at speed without compromising on workmanship quality.
  • Stage 3: We then neatly match the joint-finish of the original mortar (flush, rolled, struck or raked).
  • Stage 4: Finally, by hand we brick-clean (acid-wash) using an environmentally responsible acid alternative (GuardIt Green Acid)

Contact us today to arrange a FREE assessment.

In-Fill

Are you removing an air-con, door or window? Re-sizing a window or door? Need it “bricked-up”?

Be warned that poor workmanship with in-fills will not only be an eyesore but more importantly will devalue your property. This can be avoided!

We take pride in every project; no matter how big or small. You will receive our full attention to every detail to ensure your in-fill is as seamless as possible.

Contact us today to arrange a FREE assessment.

Piers & Front Fences

Thinking about a feature brick front fence? Piers for your facade?

We’d love to hear your vision & help you make it a unique & beautiful brick & mortar reality! Our passion, knowledge, quality workmanship & commitment to thorough communication will make the entire process an easy experience for you.

Contact us today to arrange a FREE assessment.

Hand Brick-Cleaning (Acid-Wash)

We also specialise in acid-washing by hand using a safe & environmentally responsible alternative (GuardIt Green Acid) to hydrochloric acid or phosphoric acid.
We love this product (& you will too!) for these practical benefits:

  • Organic & natural product; greatly reduced environmental impact
  • Garden-friendly; will not kill your plants or grass!
  • Non-fuming; will not cause nearby pets or wildlife breathing discomfort
  • Non-corrosive; safe when in contact or close proximity with delicate materials
  • Touch-safe; no chemical burns, unlike any other acid known for brick-cleaning

The reasons we choose to acid-wash by hand are:

  • No risk of mortar joint “blow-outs”; thanks to the low-pressure natural of brushing compared to high-PSI spray systems
  • More control of overall quality
  • Can wash brickwork in a shorter timeframe after completition; again thanks to the low-pressure nature
  • Safer to apply

Even if you aren’t currently our client for brickwork but require this service, feel free to contact us today.